Quick Summary
As you can see, a small area at the top of the lens was peeling. This area was masked off and sprayed in just two quick coats!
For starters, the project car was peeling on the upper section of the headlight lens. I decided to take a spot spray approach.
I quickly scraped off the remaining flakes of residue from the damaged lens and proceeded to clean the surface. Lastly, I used wide masking tape to affix cardboard around the target area.
The first coat of Keep Clear went on fine with two quick passes. After a few minutes had passed, I applied a second coat.
I was very impressed by the result. If you’d like to check out the product listing, you can do it HERE. TIP: If I had taken more care to remove the rest of the flaked-off finish, my results would have been better.
*Comment below if you use this!
